Press "Enter" to skip to content

Posts published in “Day: September 25, 2019”

How to install water filtration systems

Michael 0

Tap filters are installed in water pipes at home so that the water that comes out of the tap can be drunk directly without the need to boil it again, without waiting. Tap water filters can filter well water and PDAM water as long as the pressure is sufficient and the water is clear.

Water filtration systems require accuracy and a little knowledge about the procedures for dismantling pipes and tap water. however, you don’t need to worry because the user guide or guide will always accompany you in every purchase package.

Before installing, make sure the purchase package is complete. Includes, key covers / openers, filter covers, rubber seals, filter housing itself, ceramic filters, 2 rubbers for ceramic filters, nuts, bolts, hoses, and 1 set of supporting legs. Also prepare supporting equipment such as pipes and additional tap stops, sealtapes, double nipples, and other handyman equipment.

Then, remove the tap located on the place you want to install. Attach one double nipple to the Filter Housing and stop the faucet by using a sealtape. Tighten the double nipple carefully so as not to shake the iron socket contained in the Filter Housing. Then attach 1 other double nipple to the other side of the stop tap. Fasten it well using a sealtape, then attach it to the available tap holes.…